nokia 6120c no signal

i do hardware 1st but in hardware all thing ok.
then i flash it but no solution…
——————————————–

Connect phone on selected interface…

Connect phone on selected interface…

Phone found!
Series 60 Device detected!
read info… – Ok

Reading Phone Info….
Connected phone – Nokia 6120
Software ver : V 07.20 05-10-09 RM-243 (c) Nokia
IMEI : 354315048851830
XappVer : 00000672
Ape Ver : 07.20
APE Var : Vr MEA_B 01-12-06 RM-243
APE ADSP: 256
DSP Ver : 06w41pb_08w28.0.3_rm243
APE Test: rm243_ENO_A_2009wk15v0.100
PPM :
CNT :
Product SN : M1K490137
Product code : 0550022
Base Prd.code: 0548116
Long Prod.SN : 0
Hardware info=======
HWID : 1103
Retu : 16
Tahvo : 22
Batery: 4078 mV
APE BT: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
APE HW: 256
Lock info ===========
IMEI : 354315048851830
IMEI spNet : 3A 45 13 05 84 58 81 03
IMEI svNet : 33 45 13 05 84 58 81 63 F0

Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL2 phone detected

User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Reboot….
Connection opened successfully
Waiting for communication response…
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1A30010361A8005246706D63FDED20EFD2153149
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER…
2nd boot not accepted… Alive Request not done :(
Boot error… :(

Boot error #1, break :(

Error on SPR reading :(

Connect phone on selected interface…

Phone found!
Series 60 Device detected!
read info… – Ok

Reading Phone Info….
Connected phone – Nokia 6120
Software ver : V 07.20 05-10-09 RM-243 (c) Nokia
IMEI : 354315048851830
XappVer : 00000672
Ape Ver : 07.20
APE Var : Vr MEA_B 01-12-06 RM-243
APE ADSP: 256
DSP Ver : 06w41pb_08w28.0.3_rm243
APE Test: rm243_ENO_A_2009wk15v0.100
PPM :
CNT :
Product SN : M1K490137
Product code : 0550022
Base Prd.code: 0548116
Long Prod.SN : 0
Hardware info=======
HWID : 1103
Retu : 16
Tahvo : 22
Batery: 4072 mV
APE BT: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
APE HW: 256
Lock info ===========
IMEI : 354315048851830
IMEI spNet : 3A 45 13 05 84 58 81 03
IMEI svNet : 33 45 13 05 84 58 81 63 F0

Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL2 phone detected

User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Initializing Tests…
IMEI : 354315048851830 , Phone : RM-243 Nokia 6120
Get keys…
PASSED | ST_TAHVOINT_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_IO_CTRL_LOOP_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKUP_BATT_TEST
PASSED | ST_SLEEPCLK_FREQ_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
NOT EXECUTED | ST_EXT_DEVICE_TEST
NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST
NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST
NOT EXECUTED | ST_CDSP_TX_IQ_TEST
NOT EXECUTED | ST_CDSP_TXC_DATA_TEST
NOT EXECUTED | ST_CDSP_PWR_DETECTOR_BIAS_TEST
NOT EXECUTED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
SelfTests end
Done!

Elapsed: 00:01:06

Core : v1.65 , BB5XG FlashEngine : v4.2

Selected FlashSettings : Manual
Check FlashFiles, Please, wait…

Files Set for Flashing :
MCU : rm243_07.20_prd_core.fpsx
PPM : rm243_07.20_prd_vB01_01_euro1.fpsx
CNT : rm243_ENO_A_2009wk15v0.100.fpsx
APE : rm243_07.20_prd_UDA_Nokia_Noir.fpsx
Flashing phone now…
Check files done…
-> SWversion check skipped : Manual mode selected
Check communication with phone….
ADL req restart
Communication verify done… Preparing…
Gathering phone info…
Check communication with phone…
Reboot….
Connection opened successfully
Waiting for communication response…
BootRom : 1st boot ok
ASIC ID: 000000010000022600010006400C192101051103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 1A30010361A8005246706D63FDED20EFD2153149
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER…
Processing UPDAPP …
Processing PASUBTOC …
Boot Done! :)
TIME : Boot time : 00:00:30
Reopening the connection…
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
Waiting for response: 26
Waiting for response: 25
Waiting for response: 24
Waiting for response: 23
ADL Server confirm flashmode!
Get req info : empty
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm243_07.20_prd_core.fpsx
Found 3 areas to erase
Erasing area 0×00040000 – 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0×00083400 – 0x0087FFFF, NAND, CMT
Result: 0000
Erasing area 0x00B80000 – 0x04DFFFFF, NAND, CMT
Result: 0000
Partition erase not allowed by loader
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_core.fpsx
Total 404 [404/0/0] blocks to write, writing…
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS*CORE]
CMT : Writing Hash CERT [SOS+ROFS]
TIME : Write time : 00:00:55
MCU Write done
===Flashing [PPM]===
Erase : Processing rm243_07.20_prd_vB01_01_euro1.fpsx
Found 1 areas to erase
Erasing area 0×03300000 – 0x04DFFFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_vB01_01_euro1.fpsx
Total 184 [184/0/0] blocks to write, writing…
CMT : Writing Hash CERT [SOS+ROFX]
TIME : Write time : 00:00:30
PPM Write done
===Flashing [CNT]===
Erase : Processing rm243_ENO_A_2009wk15v0.100.fpsx
Found 1 areas to erase
Erasing area 0×00880000 – 0x00B7FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_ENO_A_2009wk15v0.100.fpsx
Total 18 [18/0/0] blocks to write, writing…
CMT : Writing Hash CERT [SOS*ENO]
TIME : Write time : 00:00:01
CNT Write done
===Flashing [APE]===
Erase : Processing rm243_07.20_prd_UDA_Nokia_Noir.fpsx
Found 1 areas to erase
Erasing area 0x04E00000 – 0x07B3FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing rm243_07.20_prd_UDA_Nokia_Noir.fpsx
Total 1 [1/0/0] blocks to write, writing…
TIME : Write time : 00:00:00
APE Write done
=================
ADL : End flashing
ADL : Finalize…

Flashing done!
Total flash time : 00:01:28
Reboot phone now…

Reading Phone Info….
Connected phone – Nokia 6120
Software Info: V 07.20 05-10-09 RM-243 (c) Nokia
IMEI: 354315048851830
Ape Version: 07.20
Product code: 0550022
Checking…
SimLock status : Can’t get status
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults…
FullFactorySet… Ok!
UserDataDefaultsSet…OK!
ServiceDefaultsSet… Ok!
LeaveDefaultsSet… Ok!
ProductTuneSet…OK!
SwUpgradeSet…OK!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!

Elapsed: 00:02:24
Connect phone on selected interface…

Phone found!
Series 60 Device detected!
read info… – Ok

Reading Phone Info….
Connected phone – Nokia 6120
Software ver : V 07.20 05-10-09 RM-243 (c) Nokia
IMEI : 354315048851830
XappVer : 00000672
Ape Ver : 07.20
APE Var : rofs_version_inforofx_version_info
APE ADSP: 256
DSP Ver : 06w41pb_08w28.0.3_rm243
APE Test: rm243_ENO_A_2009wk15v0.100
PPM :
CNT :
Product SN : M1K490137
Product code : 0550022
Base Prd.code: 0548116
Long Prod.SN : 0
Hardware info=======
HWID : 1103
Retu : 16
Tahvo : 22
Batery: 4072 mV
APE HW: 256
Lock info ===========
IMEI : 354315048851830
IMEI spNet : 3A 45 13 05 84 58 81 03
IMEI svNet : 33 45 13 05 84 58 81 63 F0

Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created

SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL2 phone detected

User Code : 12345
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!

Initializing Tests…
IMEI : 354315048851830 , Phone : RM-243 Nokia 6120
Get keys…
PASSED | ST_TAHVOINT_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_IO_CTRL_LOOP_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKUP_BATT_TEST
PASSED | ST_SLEEPCLK_FREQ_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_EXT_DEVICE_TEST
PASSED | ST_CDSP_RF_BB_IF_TEST
PASSED | ST_CDSP_RF_SUPPLY_TEST
PASSED | ST_CDSP_TX_IQ_TEST
UNKNOW | ST_CDSP_TXC_DATA_TEST
PASSED | ST_CDSP_PWR_DETECTOR_BIAS_TEST
PASSED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_SEC_CAMERA_IF_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_MAIN_LCD_IF_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_RADIO_TEST
SelfTests end
Done!

Elapsed: 00:01:07

—————————————

View Forum Replies